C-TEC’s XFP single loop 16 zone addressable fire alarm panel offers high performance at a very competitive price. LPCB certified to EN54 parts 2 & 4, it is supplied in an attractive flush or surface mountable plastic enclosure, offers combined keypad or keyswitch entry to Access Levels 2 and 3 and is compatible with Apollo's XP95/Discovery protocol.

C-TEC’s XFP single loop 16 zone addressable fire alarm panel offers high performance at a very competitive price. LPCB certified to EN54 parts 2 & 4, it is supplied in an attractive flush or surface mountable plastic enclosure, offers combined keypad or keyswitch entry to Access Levels 2 and 3 and is compatible with Apollo's XP95/Discovery protocol.

C-TEC’s XFP single loop 32 zone addressable fire alarm panel offers high performance at a very competitive price. LPCB certified to EN54 parts 2 & 4, it is supplied in an attractive flush or surface mountable plastic enclosure, offers combined keypad or keyswitch entry to Access Levels 2 and 3 and is compatible with Apollo's XP95/Discovery protocol.

Comes in 16 or 32 zone option, Can be used to repeat the functions of an XFP Main panel at remote parts of a site (e.g. all potential fire service entrances). Offers all of the functions and controls of an XFP Main panel (access levels 1, 2 and 3).

LPCB certified to EN54-2/4, C-TEC's CFP two-wire 2 zone AlarmSense fire panel is designed to work with Apollo's AlarmSense range of detectors, call points, sounders and visual indicators all on one cable.

LPCB certified to EN54-2/4, C-TEC's CFP two-wire 4 zone AlarmSense fire panel is designed to work with Apollo's AlarmSense range of detectors, call points, sounders and visual indicators all on one cable.

LPCB certified to EN54-2/4, C-TEC's CFP two-wire 8 zone AlarmSense fire panel is designed to work with Apollo's AlarmSense range of detectors, call points, sounders and visual indicators all on one cable.

Sigma CP 2 zone panel compatible with most standard, conventional detectors, call points and sounders. configuration features available ensure suitability for new installations or panel replacements.

Sigma CP 4 zone panel compatible with most standard, conventional detectors, call points and sounders. configuration features available ensure suitability for new installations or panel replacements.

Sigma CP 8 zone panel compatible with most standard, conventional detectors, call points and sounders. configuration features available ensure suitability for new installations or panel replacements.

Sigma CP AlarmSense 2 zone panel supports apollo AlarmSense range of devices includes smoke and heat detectors, call points, base sounders, base sounder/beacons and relay units – all wired to the same pair of cables.

Sigma CP AlarmSense 4 zone panel supports apollo AlarmSense range of devices includes smoke and heat detectors, call points, base sounders, base sounder/beacons and relay units – all wired to the same pair of cables.

Sigma CP AlarmSense 8 zone panel supports apollo AlarmSense range of devices includes smoke and heat detectors, call points, base sounders, base sounder/beacons and relay units – all wired to the same pair of cables.

Syncro AS is a 1 or 2 loop 16 Zone multi-protocol panel, enabling choice to our customers, Syncro AS supports Apollo, Argus Vega and Hochiki detection, making it ideal for small and medium sites that require advanced fire sensing and evacuation options.

Apollo addressable manual callpoint will work with any addressable alarm panel using Apollo protocol.

Manual Call Points for conventional fire alarm systems complying with EN 54-11. Call Point consists of a 470 Ω resistor in series with a normally open switch contact.

The AlarmSense Manual Call Point is designed to operate with Alarmsense compatible control panels.

The optical smoke detector used for conventional fire alarm systems is part of the Apollo Series 65 range. The detector is activated when smoke enters the chamber and causes an LED light pulse to scatter. At this point, the optical smoke detector changes in to the alarm state.

The Series 65 Heat Detector used for conventional fire alarm systems and works by monitoring the temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. There are 12 heat detectors in the Series 65 range designed to suit a wide variety of operating conditions.

The Hochiki ALG-EN Photoelectric Smoke Detector is fully compatible with Hochiki’s ESP Analogue Addressable Protocol. The Hochiki ALG-EN smoke chamber has a unique improved baffle design which allows smoke to enter the chamber while keeping out of ambient light.

The Hochiki ATJ-EN(WHT) addressable heat detector incorporates a variable temperature heat element and a rate of rise heat element, both of which are controlled from the Control Panel, allowing either thermal element or both elements simultaneously to be active in making the fire decision.

The XP95 range of analogue addressable fire detectors uses tried and trusted technology to give the best performance, and has unique features that benefit the installer and the end user. It is suitable for medium-to-large applications with simple installation requirements.

The XP95 Heat Detector are used for Addressable systems and monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature. The XP95 range features two heat detectors, standard and high temperature.

AlarmSense is a range of conventional fire detection and alarm products designed to be connected to the same pair of supply wires, making installation quicker and less expensive.

AlarmSense is a range of conventional fire detection and alarm products designed to be connected to the same pair of supply wires, making installation quicker and less expensive.

The Series 65 Detector Base with Diode are for use with conventional systems which have manual call points and detectors on the same circuit. These are easy to fit and detectors can lock into place without the need for any force. Plus other devices on the same circuit will continue to work if the detector is removed.

An Apollo XP95 detector base is required for each Apollo XP95 detector you wish to install in your analogue addressable fire alarm system. A wide range of bases with many functions are available for you to choose from depending on the requirements of your application.

The Hochiki CHQ-SOM is an intelligent single output module designed specifically for use on a Hochiki analogue addressable loop circuit. This unit features a volt-free relay contact that can be configured as either N/O or N/C. The relay contact is rated to 30V dc (max) and 1A (resistive load).

Apollo XP95 Interfaces are available in several types including output, input, input & output units and also mains rated fire alarm interfaces. An Apollo XP95 Interface is an ideal way to connect a fire alarm system to other services around a building.

Evolution offer routine testing of any fire alarm system and the testing and commissioning of fire alarm systems in line with BS5839 part 1.